Posts: 190
The Ozarks, Missouri
Detector used: BH Tracker IV, Fast Tracker, 4, 7, 8, 10 and 11" DD coils
|
 |
Posted Dec 06, 2009, 07:46:07 PM |
|
Here is an old knife that I have had for years. I don't know much about it other than I was told it was an old knife in the 1940's from the person I got it from. There are absolutely no markings on it anywhere. Just curious. As you can see from the pics, it has seen its share of use. Thanks, Doug    
|
|
|
|
|
Posts: 1773
LET FREEDOM RING!Where good deeds are performed daily
Detector used: Garrett Fortune Hunter, Compass Coin Magnum.
|
 |
Reply To This Topic #1 Posted Dec 06, 2009, 07:51:19 PM |
|
My best guess is anywhere from about the 1860's up until maybe 1920's-1930's. Hope this helps.
Scott
PS. Is there any writing or markings on the blade close to the handle one one side, the other side or both?
|
CAN YA DIG IT? Democracy: The only system where two idiots can outvote one genius
|
|
|
Posts: 190
The Ozarks, Missouri
Detector used: BH Tracker IV, Fast Tracker, 4, 7, 8, 10 and 11" DD coils
|
 |
Reply To This Topic #2 Posted Dec 06, 2009, 08:01:55 PM |
|
That sounds like that age range that I was thinking. From what I know of the person that I got it from, who was a friend of my grandmother, I was figuring 1880-1910 or so. I know from studying family history though and listening to family stories, things aren't always as old as someone thinks they are.
Thanks for the info.
Doug
|
|
|
|
|
Posts: 4559
North Carolina
|
 |
Reply To This Topic #3 Posted Dec 06, 2009, 08:15:13 PM |
|
Hi, I found one like it in our kitchen at the center and was told 20's
|
A world in which youth and adults learn, grow and work together as catalysts for positive change. VISIT OUR WEBSITE UNDER THE METAL DETECTORS SECTION FOR DETECTOR SALES!----> www.allaroundashevillenc.com
|
|
|
Posts: 532
east tennessee
|
 |
Reply To This Topic #4 Posted Dec 07, 2009, 12:49:15 AM |
|
a friend had one, same looking blade and all. i was told it was the person's mother leaning me to believe it early nineteen hundreds like 1920 ish. but that is just memory and third hand at that. i can't imagine the years of use to make the blade look that way. the blade was rather thin (is this one?) and "made a particularly good tomato slicing knife", the lady told me, "that she wouldn't use anything else". i think it was the slight imperfections in the blade edge. but anyway i saw it when wood pretty good shape. then years later the wood was ruined-dry, gray, cracked, loose but squeaky clean. find out they began putting it in the dishwasher daily i figure. the dish washer did damage quick and artificially aged or in my eyes ruined wood. yours still has the natural wood look. keep it away from the dish washer machine. note i said 'machine'!
|
|
|
|
|
|
 |
Reply To This Topic #5 Posted Dec 07, 2009, 10:55:28 AM |
|
Never put a knife in the dishwasher, especially a wood handled one
|
|
|
|
|
Posts: 532
east tennessee
|
 |
Reply To This Topic #6 Posted Dec 07, 2009, 12:17:43 PM |
|
Never put a knife in the dishwasher, especially a wood handled one
ya got, ya got got, ya got got got got that right! 
|
|
|
|
|
Posts: 1800
California
Detector used: G.M.T.,M.X.T.& X.LT.
|
 |
Reply To This Topic #7 Posted Dec 07, 2009, 12:41:28 PM |
|
Man,I had and used one just like it for years,when I trapped,I hope it wasnt valuable??
|
G.M.T. M.X.T , X.L.T. 4"& 2.5" dredge with a little luck!!
|
|
|
Posts: 255
Costa Mesa CA
Detector used: Whites DFX
|
 |
Reply To This Topic #8 Posted Dec 07, 2009, 09:11:49 PM |
|
turn of the century
|
|
|
|
|
da book worm--researcher Posts: 9437
callahan,fl
Detector used: current ace 250 --( BH also) used many others too
|
 |
Reply To This Topic #9 Posted Dec 07, 2009, 10:15:34 PM |
|
most likely a turn of the century model -- three thru the blade stainless steel rivets to hold the handle on -- the type of metal used in the rivets are a tip off in the old days brass was used --as it because less costly to produce stainless steel it was more widely used. -- however for the blade it self high carbon steel was used since it held a razor sharp edge -- however it not properly washed off and then oiled after cutting acidic type foods they would rust -- properly cared for high carbon blades have a dull gray color to them and are easy to sharpen and hold a razor edge .
|
|
|
|
|
|